| Can't find your size? Contact us for availability of missing size! |
Sizes: Single Sizes
Boot Type: Hybrid composite, hand lasted
Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP) - GFK
Cuff Material: Boot without cuff
Heat Moldability: Not heat moldable
Material Upper / Liner: Polyurethane (PU) nano-leather
Top Closure: No top closure
45° Closure / Front Foot Closure: Micro adjustable Force ratchet buckle / Waxed laces
Liner: Built in liner with SBR material
Liner Top Closure: Lacing
Innersole: No innersole
Ventilation: High
Inline Skate Height in CM: 25cm (size 39)
Frame Name: Powerslide Elite
Frame Material: AM 60B magnesium
Frame Mounting Standard: TRINITY 3-point mounting
Max. Wheel Size: 125mm
Frame Wheel Base (Inch / MM): 12.5" (318mm)
Frame Axles: Single axle, AL 7075, 8mm, Torx T25
Adjustable Side to Side: Yes, TRINITY shell, 4mm
Adjustable Front to Back: Yes, TRINITY shell, 8mm
Frame Manufacturing Process: 3D cast
Wheel Name: Powerslide Infinity
Wheel Diameter: 110mm
Wheel Hardness: 85A
Wheel Compound: SHR= Super High Rebound
Wheel Bearing Standard: 608 Standard
Wheel Spacer: AL floating (UFO) spacer, 8mm
Wheel Width: 24mm
Bearing Brand: WCD Wicked
Bearing Rating: ABEC 5
Bearing Standard: 608 Standard
Bearing Material: Chrome steel
Bearing Shield: RZ, Single sided rubber coated steel shield
Bearing Lubrication: Kyodo grease
Weight: 1160g (size 39)
Included Accessories: Tool - T25 Torx
Brake Compatibility: 907031
Wheel Manufacturing Process: Cast
Wheel Setup: 3x110mmHow to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. |
2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your MONDO size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. |
3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
+371 26035765
WhatsApp
E-Mail