Introducing the USD Aeon Sam Crofts V – The pinnacle of contemporary skate design.
This latest Aeon model comes with our new fully reworked open shell design, in a harder plastic with extra glass fibre reinforcement, for faster grinds and increased responsiveness. The skate features an integrated and extra reinforced suede nubuck leather soft top that merges seamlessly into the full suede skin.
Designed and tested by one of the most explosive and creative skaters in the scene, this is a skate built for the bold. From innovative stunts to fast and technical bowl lines, the Crofts V Aeon is your modern all-in-one weapon for next-level aggressive skating.
Seamless Power – An extension of your body
The Aeon boot is all about connection. The unibody construction strips away all unnecessary hardware, giving you the lowest centre of gravity and most direct energy transfer possible in an aggressive skate. Sam’s latest pro model now features a redesigned lower cut open shell construction. The shell is now reduced down to below the eyelets line and is topped with an extra reinforced and premium quality suede nubuck leather soft top, integrated into the full suede skin. The skate also debuts the new Kizer Memory buckles, set them once and they’ll never forget. These new memory buckles come fitted to the latest Gen 3 Aeon cuffs, offering an exact fit in every shell size. The skate also comes as standard with the latest fully heat-mouldable MYFIT Second Skin V.2 liner, with an additional matching suede tongue cover and details. The Second Skin V.2 liner closely hugs your foot for an extremely responsive feel whilst still offering breathable all-day comfort.
Lower, Lighter, Faster – The Aeon Ethos
The genius of the Aeon lies in its unibody design, where boot, soul and frame are all one piece. This unique system gives you the lowest possible ride height, unmatched stability, energy transfer and a feather light feel. This one piece design also allows for an extra wide split groove, offering the most optimized flat set up on the market, giving you total confidence on all grinds whilst still rolling up to full 61mm flat set up, for maximum speed.
Sam’s Vision – Your Weapon
The Aeon Sam Crofts V isn’t just a skate, it’s a mindset. Created for the skaters who see the city as an endless canvas and every session as a statement. The Aeon Crofts V is for pushing boundaries, skating fast, and going big without compromise. Welcome to the next chapter in street skating.
• Unibody Construction for Enhanced Control: The Aeon series is defined by its unibody design. Lower, lighter, faster.
• Custom MyFit Pro Liner with Recall Innersoles: Developed in collaboration with the MYFIT design team, the Crofts V pro liner draws inspiration from the latest MYFIT Second Skin V.2 liners and classic suede shoe aesthetics. Coming as standard in this model with MYFIT Recall innersoles for instant out the box comfort.
• Simplified Closure System with Premium Waxed Laces: The debut of the Kizer Memory buckle, our most convenient closure system yet. In pursuit of a streamlined design and classic shoe/boot aesthetics, the standard 45-degree straps have been removed and replaced with premium waxed laces, plus an additional set of hockey style waxed laces in the box. The 45 degree mount holes are still in place beneath the skin, for an easy 45 degree strap modification, if you require.
• USD UHR Wheels and Wicked ABEC 9 Bearings: Equipped with the latest USD 58mm Ultra High Rebound wheels, offering exceptional grip, speed and control. Complete with Wicked ABEC 9 bearings.
How to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. | 2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your MONDO size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. | 3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
![]() | At MYFIT we are experts in skate parts that improve your fit enhancing your skate performance, but liners are one of these parts that we excel at it. Often overlooked, liners can provide superior qualities to your skate, they can improve the fit, increase responsiveness, add more support, and of course, make you skate more comfortable. |
![]() | HEAT MOLDING technology. Heat up boots and adjust them! MYFIT logo on your skates means you can heat mold them and shape to foot. How can I heat mold them?
In the process of heating special thermo forming liner materials become soft and puffy. When cooling they stay firm and copy shape of your foot. This is done to achieve maximum comfort, relieve possible pressure points and maximize overall performance. Is heat molding MYFIT liners mandatory? Not at all, because most skaters find them comfortable right out of the box. Also, while skating, they adapt to your feet from natural body temperature! |
![]() | DUAL FIT technology. Liner that stretches and fits two sizes of feet. The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. This allowing us to cater to for sizes with a single liner. |
![]() | MYFIT RECALL MEMORY FIT. Padding made of super comfortable memory foam. Made of a combination of high-quality memory foams, MYFIT Recall Memory Fit liners wraps around your foot comfortably like a sock and provides exceptional lateral support in the ankle area. The memory foam adjusts in seconds to the shape of your foot due to your body heat and this function will work every time you put your feet in your skate. |
![]() | 3D ANATOMICAL PADDING. 3D shaped ankle padding for fit and comfort. Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates. |