Zoom Pro 80 Black – Stealth Mode Engaged
Sleek. Responsive. Ready to fly. The Powerslide Zoom Pro 80 Black is designed for skaters who live the city at speed. With its minimalist all-black aesthetic and marbled detailing, this skate doesn’t just look powerful — it is. Built to handle intense urban sessions, it offers all the control and agility you need to dominate your concrete playground.
Low-Key Looks, High-Level Comfort
The Zoom Pro 80 Black keeps it clean and performance-focused. Its classic black shell is paired with a MYFIT Basic Dual Fit liner, giving you the right balance of support and comfort from your first stride. New! The Basic liner is now also heat moldable to adjust the fit if needed.
The closure consists of the Kizer Clipper buckle, micro-adjustable Crown buckles above the wrist, and sturdy, standard black waxed laces. The combination ensures a comfortable, secure fit that gives you control without restricting movement.
Precision Engineered for Urban Flow
Whether you’re skating to work or diving into a night session, the Elite FSK cast aluminum frame gives you the edge. Depending on your size, the frame is 243mm (4x80mm) for smaller sizes or 275mm (4x90mm) for larger feet, offering balance and power in the right proportions.
Rolling on Powerslide Hurricane wheels in 80mm or 90mm with a comfortable 85A HR urethane formula, the Zoom Pro 80 delivers excellent grip and control even at high speeds. Beneath it all, Wicked ABEC 9 chrome steel bearings ensure a smooth, efficient ride every time.
And let’s not forget the TRINITY mounting system — Powerslide’s signature 3-point connection that lowers your center of gravity, increases stability, and maximizes power transfer. The result? Sharper turns, stronger pushes, and less vibration on rough terrain.
Fade Into Black, Stand Out in Performance
The Zoom Pro 80 Black is made for those who demand performance without the flash. A silent assassin in the urban jungle, it’s reliable, rugged, and ridiculously smooth. Also available in the light and earthy Zoom Pro 80 Sand colorway — perfect for skaters who want a different kind of bold.

Sizes: Dual Sizes
Boot Type: Hardboot
Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP)
Cuff Material: Glass-fiber reinforced plastic (GFRP)
Top Closure: Micro adjustable Kizer Clipper buckle
45° Closure / Front Foot Closure: Micro-adjustable Crown ratchet buckle, Standard lacing
Liner: MYFIT Prime dual fit liner
Heat Moldability: MYFIT liner, heat moldable with 90°C, plastic shell can be heat molded/adjusted
Material Upper / Liner: Elasthan, SBR and polyurethane (PU) leather patches
Liner Top Closure: -
Innersole: MYFIT EVA innersole
Shock Absorber: MYFIT 10mm PU
Ventilation: Medium
Frame Name: Powerslide Elite FSK
Frame Material: ADC10 aluminum
Frame Mounting Standard: TRINITY 3-point mounting
Max. Wheel Size: 37-42 = 80mm / 42.5-47 = 90mm
Frame Wheel Base (Inch / MM): 37-42 = 9.6" (243mm) / 42.5-47 = 10.8" (275mm)
Frame Axles: Single axle, steel, 8mm, hex 4mm, L=36mm
Adjustable Side to Side: Yes, boot
Adjustable Front to Back: Yes, frame
Frame Manufacturing Process: 3D cast
Wheel Name: Powerslide Hurricane
Wheel Diameter: 37-42 = 80mm / 42, 5-47 = 90mm
Wheel Hardness: 85A
Wheel Compound: HR= High Rebound, Cruising Comfort
Wheel Width: 24mm
Bearing Brand: WCD Wicked
Bearing Rating: ABEC9
Bearing Standard: 608
Bearing Material: Chrome steel
Bearing Shield: RZ, Single sided rubber coated steel shield
Bearing Lubrication: Kyodo grease
Wheel Spacer: AL floating (UFO) spacer, 8mm
Weight: -
Included Accessories: tool - hex 4mm
Brake Compatibility: Powerslide HABS brake S/M (907031)
Wheel Setup: 4x80mm (37-42 ) / 4x90mm (42, 5-47)
How to find your correct inline skate / rollerblade size?
For the best performance, inline skates should have a snug fit. It's not necessary to buy inline skates one size larger than your actual foot size; as they break in, all inline skates will expand and widen over time. Please note that everyone has their own measure of comfort, thus please make your final decision also considering your past experience with shoes you are wearing on daily basis. It's important to know that soft boots will expand more than hybrid (Swell etc.) or carbon boots. While we would never recommend any free space and feet movement in soft boot skates, then hardboot skates actually allow more space and comfort level given the improved support of the skate shell.
3 easy steps to measure your feet:
1. Place and fix an A4 sheet flush against a straight wall. Wear your usual skating socks for more accurancy and place your foot on the sheet, with your heel touching the wall, make sure your heel touches the wall without any pressure. |
2. Stand relaxed upon the foot you are measuring. Then, draw a line at your big toe and when marking make sure to hold the pencil vertically to prevent any deviation. It's easiest to ask a friend to draw the line for more precision. Measure the length of the paper to the line: that's your MONDO size. TIP: For the best fit, measure your foot after a short skating session or at the end of the day. |
3. Do the same for the other foot and compare measurements. The correct size that you should end up with is the length of your longer foot. Now with those measurements, you can take the correct size from our size charts. |
![]() | At MYFIT we are experts in skate parts that improve your fit enhancing your skate performance, but liners are one of these parts that we excel at it. Often overlooked, liners can provide superior qualities to your skate, they can improve the fit, increase responsiveness, add more support, and of course, make you skate more comfortable. |
HEAT MOLDING technology. Heat up boots and adjust them! MYFIT logo on your skates means you can heat mold them and shape to foot. How can I heat mold them?
In the process of heating special thermo forming liner materials become soft and puffy. When cooling they stay firm and copy shape of your foot. This is done to achieve maximum comfort, relieve possible pressure points and maximize overall performance. Is heat molding MYFIT liners mandatory? Not at all, because most skaters find them comfortable right out of the box. Also, while skating, they adapt to your feet from natural body temperature! | |
| DUAL FIT technology. Liner that stretches and fits two sizes of feet. The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. This allowing us to cater to for sizes with a single liner. | |
| MYFIT RECALL MEMORY FIT. Padding made of super comfortable memory foam. Made of a combination of high-quality memory foams, MYFIT Recall Memory Fit liners wraps around your foot comfortably like a sock and provides exceptional lateral support in the ankle area. The memory foam adjusts in seconds to the shape of your foot due to your body heat and this function will work every time you put your feet in your skate. | |
| 3D ANATOMICAL PADDING. 3D shaped ankle padding for fit and comfort. Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates. |